Single Axis Spindle Servo Positioner EVS-SWP-Z-200/500

  • This single axis servo positioner consists of fixing base, gyration main spindle case, AC servo motor, RV precise reducer, conductive system, protective cover and electrical control system.
  • Rated load: 200/500kg
  • Repeat Positioning Accuracy: ±0.08mm/±0.1mm
  • Rated Speed of Gyration: 70°/S

Technical Parameters

Single Axis Spindle Servo Positioner
Item EVS-SWP-Z-200 EVS-SWP-Z-500
Rated load
200kg (within main axis radius R300mm, center of gravity ≤ 300mm from flange)
500kg (within main axis radius R400mm, center of gravity ≤ 300mm from flange)
Standard radius of gyration R600mm R600mm
Maximum angle of gyration ±360° ±360°
Rated speed of gyration 70°/S 70°/S
Repeated positioning accuracy ±0.08mm ±0.10mm
Main axis gyration disk size φ360mm φ800
Positioner dimension(length×width×height) 1050mm×620mm×1050mm 1200mm×750mm×1200mm
Height of gyration center 850mm 900mm
Power supply Three phase 200V ±10% 50Hz (with isolation transformer) Three phase 200V ±10% 50Hz (with isolation transformer)
Insulation grade H H
Self weight about 200kg about 300kg

Structure Introduction

  • This single axis servo positioner consists of fixing base, gyration main spindle case, AC servo motor, RV precise reducer, conductive system, protective cover and electrical control system.
  • Fixing base is made by high-quality section, the machining was after stress relief annealing so the machining accuracy and the use accuracy are assured. Antirust appearance paint is beautiful and elegant, and the color can be customized.
  • Gyration main spindle case is made by high-quality section. The stress relief annealing and the machining ensure durability and stability after a long time use.
  • The AC servo motor matching the RV reducer can guarantee the high gyration stabilily, high positioning accuracy, the long durability, the low faliure rate.
  • We choose brass as the conductive material, because it has good electrical conductivity. The conduct substrate is integratal isolated, so the servo motor, robot body, welding power source is completely safe.
  • We choose Omron(Japan) PLC to control the positioner, electrical elements are all from famous brand so it has high stability, low failure rate.